NeoFox Phase Measurement Oxygen system

Description

The new NeoFox Phase Measurement system is a fluorescence-based optical sensor system that helps you reduce costs, improve stability and make calibration easier for a wide variety of oxygen sensing setups. NeoFox is the benchtop device for measurement of fluorescence lifetime, phase and intensity and is particularly suited for applications where sensitivity to drift and system stability are critical.
Plus, NeoFox is about half the cost of comparable phase measurement systems.

	FOXY Formulation (general-purpose coating)	FOSPOR Formulation (high-sensitivity for low levels of O2)	HIOXY Formulation (for hydrocarbon environments)
O2% range:	0-100%	0-20.9%	0-100% at 1 ATM
DO range (ppm):	0-40 ppm	0-8 ppm	0-40 ppm
Temperature range:	-50-+80 ºC for probes	-50-+80 ºC for probes	-50-+60 ºC
Temperature range:	0-60 ºC for patches	0-60 ºC for patches	NA
O2% resolution:	0.01-0.05%	.001%	0.01-0.05%
DO resolution:	4-20 ppb at room temp.	0.4-2 ppb at room temp.	4-20 ppb at room temp.
O2% accuracy:	5% of reading	5% of reading	5% of reading
DO accuracy:	5% of reading	5% of reading	5% of reading
Min. detectable level:	100-500 ppm	10-100 ppm	100-500 ppm
Response time:	< 1 second in gas	< 1 second in gas	< 1 second in gas
Response time:	~30 seconds with overcoating in gas	~30 seconds with overcoating in gas	~45 seconds in pure water
	~45 seconds in pure water	~45 seconds in pure water

Sterilization Guide:

Coating	Form factor	Autoclav- able	Calibration	Comment
HIOXY	Probes	Yes	Single point reset required after sterilization	Can be sterilized multiple times
	Custom RedEye patches	Yes	New calibration required after sterilisation	Can be sterilized a maximum of 2 times
FOXY	Probes/Patches	No
FOSPOR	Probes/Patches	No